In-situ Multiscale Analysis of Fracture Mechanisms in Nanocomposites
S. Behdad and B. Boesl

ASME 2012 – International Mechanical Engineering Congress and Exposition

14 November 2012, Houston, TX, USA

Dynamic Characterization and Modeling of 3D Woven Composite Ballistic Behavior
C-F. Yen, B. Boesl, A. Quabili, J. Yu, S. Ghiorse

American Society of Composites, 26th Annual Technical Conference

27 September 2011, Montreal, QB, CA, USA

A Computational Methodology for Improved 3D Woven Composite Impact Damage Tolerance Though Dynamic Micromechanics Analysis
B. Boesl and C.-F. Yen

American Society of Mechanical Engineers, McMat2011-4175

31 May 2011, Chicago, IL, USA

Progressive Failure Micromechanical Modeling of 3D Woven Composites
C.-F. Yen and B. Boesl

AIAA SDM, 52nd Annual Technical Conference

05 April 2011, Denver, CO, USA

Dynamic Micromechanical Modeling for Failure Investigation of 3D Woven Composites
R. L. Karkkainen, B. Boesl, and C.-F. Yen

American Society of Composites, 25th Annual Technical Conference,

27 September 2010, Dayton, OH, USA

Dynamic Response of 3D Woven Composite Protection Systems
B. Boesl, R. L. Karkkainen, and C.-F. Yen

American Society of Composites, 25th Annual Technical Conference,

27 September 2010, Dayton, OH, USA

Characterization of Impulse and Fragmentation Effects of Buried Artillery Shells
R. Dooley, B. Cheeseman, and B. Boesl

1st Annual Ballistics Workshop

24 May 2010, Herndon, VA USA

Dynamic Modeling for Rate-dependent Interface Failure of Composite Materials
R. L. Karkkainen, B. Boesl, C.-F. Yen

Society for the Advancement of Material and Process Engineering, Annual Meeting

15 May 2010, Seattle, WA, USA

Analysis of Fracture Mechanisms in Composites Reinforced with Hard, Metal-Oxide Nanoparticles Using Multi-Scale Analysis
B. Boesl, G. R. Bourne, B. V. Sankar, W. G. Sawyer

Society for the Advancement of Material and Process Engineering, Annual Meeting

15 May 2010, Seattle, WA, USA

Testing and Modeling of Fracture Toughness of Particle Reinforced Composites
B. Boesl, G. R. Bourne, W. G. Sawyer, B. V. Sankar

American Society of Composites, 22nd Annual Meeting,

30 September 2007, Seattle, WA, USA

In-Situ Imaging and Analysis of Crack Propagation in Nanoparticle Filled Polymers
B. Boesl, G. R. Bourne, W. G. Sawyer, B. V. Sankar

Society of Tribologists and Lubrication Engineers, 62nd Annual Meeting,

05 May 2007, Philadelphia, PA, USA

Effects of Nanoparticles on Mechanical Properties of Polymer Matrix Composites
B. Boesl, G. R. Bourne, W. G. Sawyer, B. V. Sankar

American Society of Composites, 21st Annual Meeting,

26 September 2006, Dearborn, MI, USA

Effects of Particle Distribution and Size on the Mechanical and Tribological Properties of Epoxy Nanocomposites
B. Boesl, G. R. Bourne, W. G. Sawyer, B. V. Sankar

Society of Tribologists and Lubrication Engineers, 61st Annual Meeting

07 May 2006, Calgary, AB., CA